NTS offers a range of consumables for the manufacture of printed circuits, such as tinning operations for selective hot air (Leveller), and for reflow of tin-lead deposits:

 The Flux selective plating and reflow
 The Oil for the reflow of tin-lead deposit

Flux for tinlead finishes on PCB, HAL or reflow

Etamage des plages CMS circuit impriméHot Air Solder Leveling, or Hot Air Leveling (HAL).
Flux NTS are a highly thermally stable flux with exceptional qualities regarding SMC pads.

  • Easy to apply
  • Regularity of deposit and a good wetting of SMD pads
  • NTS flux are biodegradable


The viscosity has been specially improved for an ideal penetration in smaller holes and a best surface coverage.

Very good wetting PCB surfaces, they are great for the treatment of Surface Mounted Components pads and tracks sides.

The formulation prevent users from any gas release during the immersion of the PCB in the solder bath. They are to be used at room temperature, with flux applicator or in dipping bath.

Water washable, they are biodegradable and does not produce foam in water cleaning systems.

Hot air tinning flux

NTS 147 Sn
Flux NTS 147 is a
versatile stream.

The tinning flux NTS147 Sn has a high power protection of the faces of the printed circuit with no Solder Mask, which avoids tin hooks on the substrate.

Flux for oil fusing system

NTS 101

The flux for oil fusing NTS 101 is designed to activate the Tin/Lead deposits on the printed circuits boards before oil fusing system.

The flux for oil fusing NTS 101 is very active, facilates the solderflow.

The flux for oil fusing NTS 101 applies dip, brush or fluxeur.

We recommend that, for best results , ours oils from the series 200. (Oil fusing NTS210)

Oil for OIL FUSING SYSTEM

Surfusion des circuits imprimés

Hot oil NTS for the manufacture of printed circuits board, is a synthetic organic fluid, oily at room temperature, it has been specially designed to yield a shinny tin/lead alloy fusion on PCB by immersion.

Is thermal stability reduce carbonisation and fumes.

The temperature can be well adjusted to yield a shinny tin lead surface after treatment. The high stability of the product as well as the non-existence of residues prevent from the apparition of white spots often hard to get rid off.

Oil for Reflow

NTS 210

L’huile NTS 210 est un composé de produits organiques de synthèse qui se présente sous forme d’une huile visqueuse qui a été spécialement élaborée pour assurer une fusion brillante des dépôts électrolytiques d’étain/plomb sur les circuits imprimés.

Sa stabilité en température est excellente, ce qui a pour effet de réduire les phénomènes de carbonisation et l’émission des fumées.

La grande stabilité de L’huile NTS 210 ainsi que l’absence de résidus en surface évite la formation de toutes taches blanches souvent indélébiles avec une pénétration très faible dans le stratifié.