Concerned about preserving the nature and men, NTS studying constantly new processes which use as much as possible of the active ingredients from nature, biodegradable, harmless to humans and compatible with food production processes (food contact ).
For cleaning water-based inks, N T S offers a range of detergents for cleaning of the printing unit and anilox. These products enable efficient and rapid cleaning of ink groups.

The range SMATCH NTS-CLEANER cleaners for water-based inks

Cleaning agent concentrate very effective for water-based inks notoriously difficult to remove. Contains biodegradable surfactants.

  • Suitable for treating wastewater station
  • Fast and efficient cleaning of the printing unit
  • Very economic cleanup


Cleaners SMATCH-CLEANER for water-based ink, are concentrated products containing water-based biodegradable nonionic surfactants that confer among others a very good efficiency and are adapted to facilitate the flocculation cycle stations wastewater treatment.

Detergent water-based ink for flexographic industry and rotogravure


SMATCH-CLEANER
CRISTAL

The cleaner SMATCH-CLEANER CRISTAL is an aqueous based detergent formulated for daily cleaning of anilox, printing groups, printing plates, parts etc…

The cleaner SMATCH-CLEANER CRISTAL does not attack aluminum, does not foam, is used at room temperature and can be coupled with our automatic dosing systems.

The cleaner SMATCH-CLEANER CRISTAL is used for cleaning water based inks.

This product does not pollute the groundwater.


SMATCH-CLEANER
AL 13

The detergent SMATCH-CLEANER AL 13 is an aqueous concentrated product containing aluminum inhibitors formulated with biodegradable surfactants and effectives decaling agents in all water-based inks. This formula is not classified.

The SMATCH-CLEANER AL 13 is used for cleaning anilox, parts, printing plates, etc…

Le nettoyant Smatch-Cleaner AL 13 not contain any materials deemed harmful to the environment.

SMATCH-CLEANER
SG

The detergent SMATCH-CLEANER SG is an aqueous concentrated product containing anionic and nonionic biodegradable surfactant and a decaling agent, effective on all water-based inks for general use.

The SMATCH-CLEANER SG is a product intended for flexographic anilox cleaning, printing plates, parts, ink groups, floor etc…

The addition of SMATCH–CLEANER SG in water with a ratio of 1/10 allows effective cleaning. But it is possible to increase this ratio when the anilox is particularly dirty.

SMATCH-CLEANER
SGT

The detergent SMATCH-CLEANER SGTis an aqueous concentrated product containing anionic and nonionic biodegradable surfactant and a decaling agent, effective on all water-based inks for general use.

The SMATCH-CLEANER SGT is a product intended for flexographic anilox cleaning, printing plates, parts, ink groups, floor etc…

The SMATCH-CLEANER SGT does not contain any materials deemed harmful to the environment

SMATCH-CLEANER
1010 ST

The SMATCH-CLEANER 1010 ST is an aqueous concentrated product containing biodegradable nonionic surfactants which gives it a very good efficiency.

The SMATCH-CLEANER 1010 ST is adapted to ease the flocculation cycle of treatment plants wastewater.

SMATCH-CLEANER
1011

The cleaner SMATCH-CLEANER 1011 is a water based product, concentrated, containing anionic and non ionic biodegradable surfactant with sequestering agent, anti-scale to dilute in water.

The SMATCH-CLEANER 1011 D is a product intended for flexographic anilox cleaning .
Do not use if contact with aluminum parts.

SMATCH-CLEANER
1011 AL

The cleaner SMATCH-CLEANER 1011 AL is a water based product, concentrated, containing anionic and non ionic biodegradable surfactant with sequestering agent, anti-scale to dilute in water.

The SMATCH-CLEANER 1011 AL is a product intended for flexographic anilox cleaning and printing plates.

SMATCH-CLEANER
1011 D

The cleaner SMATCH-CLEANER 1011 D is a water based product, concentrated, containing anionic and non ionic biodegradable surfactant with sequestering agent, anti-scale to dilute in water.

The SMATCH-CLEANER 1011 D is a product intended for flexographic anilox cleaning and printing plates.

SMATCH-CLEANER
1011 ST L

The SMATCH-CLEANER 1011 ST is a water based product concentrated and biodegradable. It uses non-ionic surfactants, it is non-foaming and facilitates rinses.
Effective on all types of water-based ink.

Manual cleaning of clichés or automatic machine. Dishwashing high pressure spray. Cleaning of anilox, etc …

SMATCH-CLEANER
1011 ST

The cleaner SMATCH-CLEANER 1011ST is a water based product, very concentrate, containing specific cleaning agents and non ionic surfactants which gives a very high efficiency for cleaning water based inks. Its use concentration minimizes the cost / effectiveness ratio.

The SMATCH-CLEANER 1011ST is a product for all washing machines on the market using high pressure.

SMATCH-CLEANER
1012 ST

The cleaner SMATCH-CLEANER 1012 ST is a water based product, very concentrated, for cleaning water-based inks, UV, PU, non-foaming detergent compatible with aluminum. Its concentration of use minimizes the cost-effectiveness ratio.

The SMATCH-CLEANER 1012 ST is a product for all washing machines on the market using high pressure.

The SMATCH-CLEANER 1012 ST product does not pollute the groundwater
The SMATCH-CLEANER 1012 ST does not contain any materials deemed harmful to the environment

SMATCH-CLEANER
1015

The detergent SMATCH-CLEANER 1015 is a water based product, very concentrated, containing biodegradable cleaning agents. It has been specially formulated for declogging anilox, however il can be used for cleaning printing groups and printing plates. It can also work at room temperature.

The detergent SMATCH-CLEANER 1015 is a product intended for cleaning anilox, printing groups, printing plates etc.… Do not use if contact with aluminium

The SMATCH-CLEANER 1015 does not contain any materials deemed harmful to the environment.

SMATCH-CLEANER
1056

The Ultrasonic Smatch Cleaner 1056 is a concentrated product of unclogging. It has been formulated for cleaning anilox rolls in ultrasound machines. It is particularly suitable for printers, using water-based inks, solvent based inks, UV inks and adhesives.

Cleaning anilox rolls in ultrasonic machine to unclog anilox cells for all types of inks (water, solvent, UV based etc.…).

The Ultrasonic Smatch Cleaner 1056 product is alkaline, it is recommended not to use equipment containing aluminum.